Choosing the right number of grooves for a shaking table surface is the key to gravity separation of waste materials! Jiangxi Mingxin offers shaking table surfaces with a full range of groove counts from 46 to 150, suitable for the separation of various waste materials such as lithium battery materials, circuit boards and metal ore. There is no fancy trick to groove count selection—it all depends on the actual material properties. A proper choice ensures both high recovery rate and increased processing capacity.
3 practical rules for selection, down-to-earth and no mistakes:
- By material particle size: Fewer grooves for coarse particles, more grooves for fine particles. Choose 46/60 grooves for coarse sand (>0.5mm), 88/90/110 grooves for fine sand (0.074-0.5mm), and 120/138/150 grooves for slime (<0.074mm).
- By material density difference: More dense grooves for materials with small density differences to enhance stratification; appropriately fewer grooves for materials with large density differences.
- By separation requirements: Higher groove counts for high concentrate grade; moderately lower groove counts for high recovery rate to avoid fine material loss.
All Jiangxi Mingxin shaking table surfaces are custom-made, designed based on on-site working conditions of waste material recycling. Groove count matching is fully tailored to actual separation needs. Choose on demand, and make every shaking table deliver optimal separation performance.
