#Industry ·2026-05-23
I. Quick Overview of the Equipment's Highlights Jiangxi Mingxin's aluminum frame disassembling machine truly achieves the goal of "solving all problems with one machine". It adopts a hydraulic servo system to intelligently control two modules, with a pressure accuracy of 0.2 MPa. Combined with an adaptive clamping system, it can handle aluminum frames of different specifications ranging from 25 to 55 mm. According to the actual test, it only takes 35 seconds to disassemble a single frame, which is 600% more efficient than traditional manual methods. Moreover, the recovery rate of intact frames reaches as high as 98%II. Operating Procedures (with Tips) 1. Pre-processing Stage: First, use the matching hot air gun (80°C/3 minutes) to soften the encapsulation gel, paying special attention to the four corners of the injection holes, which need to be heated for an additional 30 seconds. 2. Equipment Positioning: When pushing the photovoltaic modules into the conveyor track, ensure that the seams of the aluminum frames align with the position of the hydraulic cutting blade (the equipment is equipped with laser positioning assistance). 3. Pressure Adjustment: It is recommended to set the initial pressure to 12 MPa and fine-tune it according to seasonal temperature (reduce it to 10 MPa in summer and increase it to 14 MPa in winter). III. Maintenance Points • After daily operations, it is necessary to clean the hydraulic oil filter (the equipment is equipped with a self-cleaning function, which needs to be manually activated). • Check the tool wear every week. The standard blade angle is 602 (the detection card rules are provided with the equipment). • For abnormal situations: When the frame gets stuck, do not forcefully operate. First, activate the emergency backflow valve (red button) and then manually reset it. IV. Comparison of Actual Test Data In the batch processing of a photovoltaic power station in Jiangxi: - Traditional manual disassembly: Average daily processing capacity of 80 pieces, with a frame deformation rate of 15%. - Using Mingxin disassembly machine: Average daily processing capacity of 550 pieces, with zero frame deformation. An annual direct saving of labor costs of 270,000 yuan/unit and an increase in the value of recycled aluminum of about 150,000 yuan can be achieved. (Attached is the QR code of the on-site operation video. Scan the code to watch the detailed operation demonstration.) Photovoltaic maintenance equipment New energy technology renovation Jiangxi Mingxin Real Evaluation
2026-05-23
2026-05-23
2026-05-23
2026-05-23
2026-05-23
2026-05-23
No. 15 Industrial Avenue, Industrial Park, Shicheng County, Jiangxi Province
top
