#Industry ·2026-06-17
Are you still being tormented by -200 mesh fine ore sludge? Traditional shaking tables get clogged with materials to the point of despair, and concentrate tailings run away to the point of heartache. The recovery rate of fine particles always hovers around 60%? With the same ore, others' recovery rate is 15 points higher than yours, and the profit difference reaches millions - it's not that you're not good at operating, but that you haven't chosen the right equipment at all! Three deadly diseases of ore sludge processing - how many have you encountered? Disease 1: Bed surface clogged into a "cement floor" The ore sludge is highly viscous, and the unreasonable spacing between the bed bars of traditional shaking tables results in them being clogged in half an hour, requiring 2 hours of cleaning and half an hour of production, with extremely low efficiency. Disease 2: Fine minerals "run away en masse" -325 mesh fine minerals can't be captured, and gold, tungsten, and tin are lost with the tailings, with the tailings grade even higher than others' concentrates. Disease 3: Recovery rate like a "roller coaster" As soon as the slurry concentration changes, the recovery rate plummets, with unstable indicators that lead to bosses cursing and workers taking the blame. Jiangxi Mingxin dedicated shaking tables for ore sludge processing: treating all kinds of ore sludge problems! After 15 years of focusing on mineral processing equipment R&D, Jiangxi Mingxin has developed the 6-S dedicated shaking table specifically for ore sludge characteristics. It's not just a renamed ordinary shaking table, but a revolutionary reconstruction from the inside out: No clogging! Exclusive gradient micro-groove bed design with a gradient of 0.3-0.8mm for ore sludge automatic layering and flow guidance, with continuous operation for 8 hours without clogging and a cleaning cycle extended by 10 times! All fine particles recovered! High-frequency low-amplitude differential mechanism (280-340 times/min) combined with 0.15mm micro-bed bars, with the recovery rate of -325 mesh tungsten and tin breaking through 85% and the tailings grade reduced by 40%. Stable indicators! Intelligent stroke adjustment system automatically adapts to 15% fluctuations in slurry concentration, with a recovery rate fluctuation range of 3% and no impact on indicators during worker shifts. Data speaks: Measured at a tungsten mine in Hunan The original ore grade was 0.18%, with 73% of the material being -200 mesh. Using the ordinary shaking table, the recovery rate was 61%, while after switching to Jiangxi Mingxin's dedicated shaking table: the recovery rate increased to 86.5%, and an additional 47 tons of tungsten concentrate were recovered annually, directly generating over 3.8 million yuan in additional revenue! Consult now to get a free mineral processing optimization solution! Don't let your profits flow away with the ore sludge - call: +86 13970779688, and the first 20 customers will receive a free set of bed surfaces worth 20,000 yuan! Jiangxi Mingxin - making every mineral particle count!
2026-06-17
2026-06-17
2026-06-17
2026-06-17
2026-06-17
2026-06-17
No. 15 Industrial Avenue, Industrial Park, Shicheng County, Jiangxi Province
top
