#Industry ·2026-05-16
I. Core Advantages of the Equipment 1. Patented Cutting Technology: Utilizes a hydraulic precision positioning system to control the cutting depth error within 0.1mm. 2. Adaptive Adjustment: Equipped with a pressure sensing device that automatically matches different thicknesses (25–50mm) of aluminum frames. 3. Energy-Efficient Design: Operating power is only 5.5KW, saving 40% of energy compared to traditional equipment. II. Practical Operating Process 1. Pre-Processing Stage: Place the components tilted on the conveyor belt (recommended angle 15°) and start the automatic centering system. 2. Cutting Operation: Two cutting heads simultaneously perform four-corner cutting, with each cycle taking only 90 seconds. 3. Separation and Collection: Separate the glass from the aluminum frame using vacuum suction cups, achieving a 98% aluminum recovery rate. III. Maintenance Precautions • Clean the guide rails of debris daily (recommended using an air gun). • Check the hydraulic oil level weekly (recommended using 46 anti-wear hydraulic oil). • Tool lifespan: Under normal use conditions, it can process 3,000 component sets. IV. Comparison of Actual Test Data Compared with traditional manual disassembly: - Work efficiency increased by 600% (a single worker can handle 120 sets per shift). - Material loss rate dropped from 12% to less than 3%. - Product defect rate controlled within 0.5%. (Attached QR code for on-site operation video) Usage Recommendations: Suitable for power station operation and maintenance enterprises with an annual processing capacity exceeding 5MW, with an investment payback period of approximately 8 months. It is recommended to use Jiangxi Mingxin's original accessories to ensure the best performance of the equipment
2026-05-16
2026-05-16
2026-05-16
2026-05-16
2026-05-16
2026-05-16
No. 15 Industrial Avenue, Industrial Park, Shicheng County, Jiangxi Province
top
